Microplex M204 Especificações descarregar pdf (Página 89)

USING THE M204’S COMMAND SET: Overview 81

USING THE M204’S COMMAND SET

Overview

At this point in the manual, you should have your M204 installed and conﬁgured on

the network and at least one host conﬁgured to print to it. This section’s purpose is to

give you the basic tools to add to your print setup by introducing the Print Server’s

command set.

npsh Overview

On the Print Server itself, is an entire command set, npsh, allowing for M204 parame-

ter conﬁguration, display, and execution. These commands can be utilized through one

of these methods:

• a Telnet session,

• a remote command (i.e. rsh/rcmd/remsh),

• npconﬁg (please see npconfig Detailed Configuration Options Sub-Menu on page

21),

• DOS host software (please see Host Software on page 51),

• within an FTP conﬁguration ﬁle (please see TCP/IP Options on page 124)

• a terminal on the COM1 port (please see Manual Configuration Through the

COM Port on page 28).

The M204 can support up to 256 simultaneous TCP connections and 10 simultaneous

Telnet sessions. All npsh commands except lp are available to all of the above meth-

ods. The lp command is available only to rsh/rcmd/remsh clients. Please refer to lp

on page 89.

The M204 can be conﬁgured using the included Graphical User Interface software.

Please see USING NPWIN on page 113 for more details.

The M204’s conﬁguration parameters can also be manipulated through the FTP dae-

mon and through SNMP. Please see FTP Daemon on page 134 and Managing With

SNMP on page 129 for more details.

Note

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 203 204

Sem comentários

Microplex M204 Especificações Página 89