Microplex M204 Especificações descarregar pdf (Página 81)

CONFIGURING THE M204 FOR WINDOWS: Host Configuration 73

This printer is now available for printing and will interact with the M204’s built-in

Line Printer Daemon using TCP/IP.

NetBIOS Using Print Manager Method

In order to use this method, you must ﬁrst conﬁgure the M204 with a Microsoft Net-

works Workgroup name. This can be done by telneting to the M204, starting an npsh

session with the unit, and issuing the following command:

store pserver smb workgrp

workgroupname

where workgroupname is the name of the Microsoft Networks Workgroup that you

want the M204 to be included in (e.g. Engineering).

You must reset the M204 for this command to take affect.

1 Ensure that the network connection is functioning properly between the Windows

NT workstation and the M204. Try to ping or telnet to the unit.

2 Open Print Manager.

3 Select Connect Network Printer from the Printer menu or click on the appro-

priate toolbar item.

4 A list of network services will appear. Double click on the Microsoft Windows

Network.

5 A list of known workgroups will appear. Double click on the workgroup name

that you previously conﬁgured the M204 under (e.g. Engineering).

6 Double click on the M204 once the list of registered devices in this workgroup

appears.

7 A list of destinations (e.g. d1prn1) with NetBIOS service enabled will appear.

These are read directly from the M204. Select one of them.

8 Print Manager will then ask to install a local printer driver. Click on OK.

9 A dialogue box appears providing a list of possible printer drivers. Once you

select one, click on OK.

This printer is now available for printing using NetBIOS over TCP/IP.

Note

1 2 ... 76 77 78 79 80 81 82 83 84 85 86 ... 203 204

Sem comentários

Microplex M204 Especificações Página 81