Microplex M204 Especificações Página 71

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
Vista de página 70
CONFIGURING THE M204 FOR APPLETALK: Overview 63
CONFIGURING THE M204 FOR APPLETALK
Overview
This chapter will cover the few steps required to get your print jobs printing to an
M204 in an AppleTalk over EtherTalk environment.
The M204 does not support LocalTalk.
M204 Configuration
An AppleTalk setup does not require any Print Server configuration; the network
parameters are automatically configured for you once the M204 is booted on the net-
work. If you wish to modify some of the M204’s default settings, you can use the
built-in command set. Please see USING THE M204’S COMMAND SET on page 81
for more on the available commands.
There is no host software provided for the Macintosh. To do any configuration on the
unit, you must rely on:
npsh commands available through a telnet session. These commands could be
issued from a Macintosh workstation if you a running program like NCSA Telnet
and MacTCP is installed on your system.
a Novell workstation running the host software npsh.exe.
a Windows workstation running the NPWin software utility,
a terminal, PC, or laptop connected to one of the serial ports on the M204.
Host Configuration
Once you have physically attached the M204 to the network, the following steps will
get your Apple host printing to the Print Server:
1 Select Chooser from the Apple Menu.
2 Select the appropriate print driver icon (e.g. Laserwriter icon).
A list of available printers will appear. By default, the format of each name is
Note
Note
Vista de página 70
1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 203 204

Comentários a estes Manuais

Sem comentários