Microplex M204 Manual descarregar pdf (Página 8)

05/13/97 8

M204 v5.7.2 Release Notes (Con’t)

CE Mark

The M204 conforms with 89/336/EEC as amended (92/31/EEC and 93/

68/EEC) providing that certain requirements are met by the end user. The

requirements for CE Mark are:

1 Shielded cables must be used on all parallel and serial ports.

2 The included pink plastic caps must be placed securely over any

unused I/O ports.

Standards to which conformity is declared: ENC Directive 93/68/EEC

Manufacturer’s Name: Microplex Systems Ltd.

Manufacturer’s Address: 8525 Commerce Court

Burnaby, B.C., Canada, V5A 4N3

Type of Equipment: PCMCIA Print Server

Model #: M204

Year of Manufacture: 1994

I hereby declare that the equipment speciﬁed above conforms to the

above Directive.

Place: Vancouver, B.C.

Date: November 20, 1996

Name: Fred Fierling

Position: President

COMMAND CHANGES

The M204 print server has a command shell called “npsh” built in to its

ﬁrmware. This command shell can be accessed through telnet or remote

command sessions (i.e. rsh, rcmd, remsh) to the unit, through the “npsh”

Novell executable, or through one of the serial ports with a dumb termi-

nal, PC, or laptop directly attached.

Within the parallel port command structure of this shell, this command is

used to alter the speed and ﬂow control used on the ports:

set

portname

[-]ackmode [-]bbmode [-]fastmode [-]slow-

mode [-]vslowmode

where:

portname “

prn1” or “prn2” for the parallel ports.

ackmode Flow control. Use the

ACK signal to trigger next

data transfer. Busy mode is used as the default ﬂow

control method.

bbmode Bit Bucket mode. Simulate an attached printer even

if one isn’t attached.

fastmode Speed. Increase the data transfer rate.

Declaration of Conformity

Changed Commands

Old

1 2 3 4 5 6 7 8 9 10

Comentários a estes Manuais

Sem comentários

Microplex M204 Manual Página 8

Comentários a estes Manuais

Manuais e produtos relacionados com Digitalizar e Imprimir Microplex M204